Check bar stock spec or you may be stuck

Discussion in 'Tower, Rooftop and Antenna Installation' started by Wireless Estimator, Feb 1, 2008.

  1. Wireless Estimator

    Wireless Estimator Administrator Staff Member

    Although most engineers are familiar with the complications of elevated welding, project specifications must be carefully reviewed and clarified prior to providing your proposal. In one instance, a high Ksi reinforcing bar stock specified to be welded to a tower leg was not readily available in the full lengths specified and had to be special ordered. Another specification called for a two-part epoxy coating system application on the back side of the bar after it was welded to tubular legs.

Share This Page