Mate connectors with jumpers

Discussion in 'Managing Projects and Business Issues' started by Wireless Estimator, Feb 1, 2008.

  1. Wireless Estimator

    Wireless Estimator Administrator Staff Member

    Be sure to consider whether or not you are using jumpers at either end of the coax installation and make sure that the proper gender connectors are ordered to mate with the corresponding jumper. The antenna will usually dictate the gender of the jumper connector and then the main line to jumper connections can be decided either way. Again, at the bottom, the transceiver equipment will dictate the gender of the connector and any jumper/main line combination will then need to be decided. Also, consider the use of 90 degree connectors for low profile installations to keep the coax parallel to the back of the antennas and well concealed from view.

Share This Page