Tower Identification

Discussion in 'Tower, Rooftop and Antenna Installation' started by Erin Wall, Oct 21, 2008.

  1. Erin Wall

    Erin Wall Friend of the Community

    Have a 180ft self supporter taken down. Need to see if we can identify the make/manufacture of this tower. Tower legs have letters and numbers stamped on the bottom of each section. they are as follows
    VP71
    VO71
    VN71
    VM71
    VL71
    VK71
    The legs are solid rod approximate 6-1/2 " the base section mounting flange is 27" in diameter per leg the sections are 30 feet long

    Would appreciate if anyone has any idea the mfg. Was told it might be a stainless. Need to reengineer

    Thanks
  2. Erin Wall

    Erin Wall Friend of the Community

    Sorry you can reply to erin.wall@piedmont2way.com
  3. Marc LeClair

    Marc LeClair Frequent Poster

    Eric ? You might want to check first with Tom Hoenninger at Stainless to see if he recognizes those leg numbers. He can be reached at 800-486-3333. He?s always been helpful in the past.
  4. Erin Wall

    Erin Wall Friend of the Community

    Thanks for responding so fast Marc

Share This Page