Installation Information:

Rigid Galvanized SweepsRigid Galvanized Sweeps

The radius of the bend depends upon the conduit size, but a 24” radius is typical for primary service. The National Electric Code (NEC) establishes the minimum requirements for a safe electrical installation. Because of the varied environments in which electrical equipment is installed, local amendments are often added. Always consult local codes prior to any installation. Also, in some situations service providers willCalculator require a 36” bend radius. This will affect your material pricing which is based upon a 24" bend.

The default installation pricing is the cost that a subcontractor will charge to connect and place the rigid conduit sweep in an opened trench while on site. It does not include pulling conductors or any material.

Installation Pricing
90 Degree Sweeps (Rigid Galvanized)
Nom Pipe Size (in) Outside Dia. (in) Outside Dia. (mm) Inside Dia. (in) Inside Dia. (mm) Wall Thick-ness (in) Weight (lbs) Install (ea.)
1/2 0.84 21.34 0.62 15.8 0.104 5.1 $3.74
3/4 1.05 26.67 0.82 20.93 0.107 5.2 $3.85
1 1.32 33.4 1.05 26.64 0.126 16.1 $3.96
1-1/4 1.66 42.16 1.38 35.05 0.133 21.8 $4.07
1-1/2 1.9 48.26 1.61 40.89 0.138 26.3 $4.18
2 2.38 60.33 2.07 52.5 0.146 35 $4.40
2-1/2 2.88 73.03 2.47 62.71 0.193 55.9 $4.95
3 3.5 88.9 3.07 77.93 0.205 72.7 $5.78
3-1/2 4 101.6 3.55 90.12 0.215 88 $6.60
4 4.5 114.3 4.03 102.26 0.225 103 $7.43
               

We recommend that you contact our valued electrical contractors to obtain additional information about their services, capabilities and experience.

 
   
     
Anritsu