Product Information
Trapeze Bridging Kits
Trapeze bridge kits can be installed to allow for the support of  multiple coax and waveguide lines below the waveguide bridge channel. These kits consist of long all-thread rods, usually stainless steel, that hang below the bridge and support numerous support angles or tiers. There are angle and channel horizontal supports available, but the majority of manufacturers provide z-brackets. Each tier has a series of holes to accept bolt on or snap-in hangers. Transmission lines can be attached above and under the bracket.
 Some manufacturers provide vertical z-brackets with flat mounting plates as well as z-brackets without the rods and hardware for custom installations and wall mount applications.
|
Width
|
Description
|
Rungs
|
Wt. (lbs.)
|
List Price
|
|
12”
|
6 snap-ins or 4 butterfly hangers
|
Single
|
3.60
|
$18.67
|
|
24”
|
14 snap-ins or 12 butterfly hangers
|
Single
|
6.27
|
$26.67
|
|
12”
|
12 snap-ins or 8 butterfly hangers
|
Double
|
6.87
|
$30.67
|
|
24”
|
28 snap-ins or 24 butterfly hangers
|
Double
|
12.20
|
$41.67
|
No freight, taxes or installation charges have been included in the list price average of multiple manufacturers and distributors. You should estimate the cost of four brackets for a 10’ or 12’ waveguide bridge.
We recommend that you contact our valued manufacturers and distributors for your site-specific bridge kit requirements.
| 
